|
| Moq: | 1セット |
| 価格: | USD1,000-700,000. Based on customization. |
| 標準パッケージ: | 工業用プラスチックフィルム包装 鋼鉄線で固定 |
| 配達期間: | 30日 |
| 決済方法: | LC、T/T |
| 供給能力: | 1か月あたり30セット |
This cold roll forming solution is engineered for continuous manufacturing of trapezoidal IBR roofing panels commonly installed on factories, warehouses, and residential roof structures. The system processes galvanized steel or pre-painted steel coils within a standard thickness range of 0.3–0.8 mm, forming well-defined rib profiles that deliver reliable structural strength, efficient rainwater runoff, and a uniform finished appearance.
The machine is constructed with a reinforced welded base and high-accuracy forming rollers, allowing each forming pass to maintain stable alignment and consistent profile geometry over long production cycles. A PLC-based control platform with touch-screen interface enables quick adjustment of panel length, production quantity, and operating speed, while the integrated hydraulic cutting unit produces precise, burr-free cuts at stable running speeds of approximately 10–15 meters per minute.
| Parameter | Specification | Visual Reference |
|---|---|---|
| Structure | Double-support | |
| Working Form | Manual, motorized, or hydraulic | |
| Loading Capacity | 5T/7T/10T, customizable | |
| Coil Width | 1250mm, customizable | |
| Inner Diameter | Φ450 - Φ550 mm | |
| Out Diameter | 1500 mm | |
| Model | DC-MU1 |
| Component | Function | Visual Reference |
|---|---|---|
| Guiding Roller | Adjust the coil feeding width | |
| Pre-cut Broaching Shear | Cut the steel coil before roll forming | |
| Digital Display | See the feeding width directly |
| Parameter | Specification | Visual Reference |
|---|---|---|
| Working Speed | Around 20 m/min | |
| Structure | Wall panel type. Optional: Cast-iron stands or guide pillar | |
| Driving System | Chain system. Optional: Gearbox | |
| No. of Forming Stations | 18 stands | |
| Shaft Diameter | 70mm solid shaft | |
| Motor Power | 5.5 Kw | |
| Roller Material | 45# steel polished and chromed HRC58-62° | |
| Shaft Material | High grade 45# steel polished (CNC lathe) | |
| Steel Coil Material | PPGI or GI | |
| Steel Coil Thickness | 0.25-0.8mm |
| Parameter | Specification | Visual Reference |
|---|---|---|
| Common Power Type | Hydraulic. Optional: motor type. | |
| Hydraulic Power | 4-5.5Kw, customizable | |
| Blade Material | Cr12 Mov | |
| Hardness | With quenched treatment HRC 58 - 62° |
| Solution | Specification | Visual Reference |
|---|---|---|
| Solution 1: Run-out table | Power Type: Non-powered, mainly manual handling Dimension: Length 4m, customizable |
|
| Solution 2: Auto stacker | Power Type: Motorized, 3Kw Dimension: Length 4m-6m, customizable |
|
| Parameter | Specification | Visual Reference |
|---|---|---|
| PLC Brand | Delta, customizable | |
| Power Supply | 380v, 50HZ, 3Phase (It depends on customer requirement) | |
| Encoder Brand | Omron, customizable | |
| Language | Chinese + English, Spanish, French, Russian, etc | |
| Touch Screen | MCGS, customizable | |
| Operation type | Manual /auto two-type switch | |
| Hanging Arm Type | Saving Space | |
| Standing Type | Greater component integration and flexible positioning | |
| Parameter | Specification | Visual Reference |
|---|---|---|
| Motor Power | 5.5Kw | |
| Oil Required | N32 or N46 hydraulic oil is available | |
| Design | The hydraulic station has a fan cooling system | |
| Optional | It can be installed on or inside the roll former to save space |
| Component | Quantity |
|---|---|
| Hydraulic Decoiler | 1 set |
| Roll Former | 1 set |
| Hydraulic Cutter | 1 set |
| Out Table | 2 sets |
| PLC Cabinet | 1 set |
| Hydraulic Station | 1 set |
ビデオ
|
|
| Moq: | 1セット |
| 価格: | USD1,000-700,000. Based on customization. |
| 標準パッケージ: | 工業用プラスチックフィルム包装 鋼鉄線で固定 |
| 配達期間: | 30日 |
| 決済方法: | LC、T/T |
| 供給能力: | 1か月あたり30セット |
This cold roll forming solution is engineered for continuous manufacturing of trapezoidal IBR roofing panels commonly installed on factories, warehouses, and residential roof structures. The system processes galvanized steel or pre-painted steel coils within a standard thickness range of 0.3–0.8 mm, forming well-defined rib profiles that deliver reliable structural strength, efficient rainwater runoff, and a uniform finished appearance.
The machine is constructed with a reinforced welded base and high-accuracy forming rollers, allowing each forming pass to maintain stable alignment and consistent profile geometry over long production cycles. A PLC-based control platform with touch-screen interface enables quick adjustment of panel length, production quantity, and operating speed, while the integrated hydraulic cutting unit produces precise, burr-free cuts at stable running speeds of approximately 10–15 meters per minute.
| Parameter | Specification | Visual Reference |
|---|---|---|
| Structure | Double-support | |
| Working Form | Manual, motorized, or hydraulic | |
| Loading Capacity | 5T/7T/10T, customizable | |
| Coil Width | 1250mm, customizable | |
| Inner Diameter | Φ450 - Φ550 mm | |
| Out Diameter | 1500 mm | |
| Model | DC-MU1 |
| Component | Function | Visual Reference |
|---|---|---|
| Guiding Roller | Adjust the coil feeding width | |
| Pre-cut Broaching Shear | Cut the steel coil before roll forming | |
| Digital Display | See the feeding width directly |
| Parameter | Specification | Visual Reference |
|---|---|---|
| Working Speed | Around 20 m/min | |
| Structure | Wall panel type. Optional: Cast-iron stands or guide pillar | |
| Driving System | Chain system. Optional: Gearbox | |
| No. of Forming Stations | 18 stands | |
| Shaft Diameter | 70mm solid shaft | |
| Motor Power | 5.5 Kw | |
| Roller Material | 45# steel polished and chromed HRC58-62° | |
| Shaft Material | High grade 45# steel polished (CNC lathe) | |
| Steel Coil Material | PPGI or GI | |
| Steel Coil Thickness | 0.25-0.8mm |
| Parameter | Specification | Visual Reference |
|---|---|---|
| Common Power Type | Hydraulic. Optional: motor type. | |
| Hydraulic Power | 4-5.5Kw, customizable | |
| Blade Material | Cr12 Mov | |
| Hardness | With quenched treatment HRC 58 - 62° |
| Solution | Specification | Visual Reference |
|---|---|---|
| Solution 1: Run-out table | Power Type: Non-powered, mainly manual handling Dimension: Length 4m, customizable |
|
| Solution 2: Auto stacker | Power Type: Motorized, 3Kw Dimension: Length 4m-6m, customizable |
|
| Parameter | Specification | Visual Reference |
|---|---|---|
| PLC Brand | Delta, customizable | |
| Power Supply | 380v, 50HZ, 3Phase (It depends on customer requirement) | |
| Encoder Brand | Omron, customizable | |
| Language | Chinese + English, Spanish, French, Russian, etc | |
| Touch Screen | MCGS, customizable | |
| Operation type | Manual /auto two-type switch | |
| Hanging Arm Type | Saving Space | |
| Standing Type | Greater component integration and flexible positioning | |
| Parameter | Specification | Visual Reference |
|---|---|---|
| Motor Power | 5.5Kw | |
| Oil Required | N32 or N46 hydraulic oil is available | |
| Design | The hydraulic station has a fan cooling system | |
| Optional | It can be installed on or inside the roll former to save space |
| Component | Quantity |
|---|---|
| Hydraulic Decoiler | 1 set |
| Roll Former | 1 set |
| Hydraulic Cutter | 1 set |
| Out Table | 2 sets |
| PLC Cabinet | 1 set |
| Hydraulic Station | 1 set |
