|
| Moq: | 1セット |
| 価格: | USD1,000-700,000. Based on customization. |
| 標準パッケージ: | 工業用プラスチックフィルム包装 鋼鉄線で固定 |
| 配達期間: | 30日 |
| 決済方法: | L/C、T/T |
| 供給能力: | 月額30セット |
This ridge cap roll forming production line is designed for roofing accessory manufacturers, construction suppliers, and steel profile distributors. It provides stable performance, reduced floor space, and versatile customization. With features like folded edges, rib punching, and anti-rust design, it ensures higher product quality, safety, and durability for global roofing projects.
The ridge cap is made from galvanized or pre-painted steel, with thickness ranging from 0.3mm to 0.6mm. It features an arc-shaped profile with folded edges for safety and corrosion resistance. Rib embossing enhances strength and aesthetics. Widely applied in residential, commercial, and industrial roofing, it serves as both a protective and decorative component.
Material: Galvanized Steel / PPGI / Aluminum | Thickness: 0.3-0.8mm
Yield strength: 200 - 350 Mpa | Tensil stress: 200 -350 Mpa
Flow Chart: Decoiler -> Guide -> Roll forming machine -> Hydraulic Punch -> Hydraulic Cutter -> Out table
Process: The steel coil is guided into the roll former, where it is shaped into an arc ridge cap with folded edges. A hydraulic punching unit creates decorative or reinforcing ribs. The hydraulic cutter ensures precise length cutting. This process delivers uniform, durable, and aesthetically enhanced roofing ridge caps efficiently.
| Structure | Double-support | |
|---|---|---|
| Working Form | Manual, motorized, or hydraulic | |
| Loading Capacity | 5T/7T/10T, customizable | |
| Coil Width | 1250mm, customizable | |
| Inner Diameter | Φ450 - Φ550 mm | |
| Out Diameter | 1500 mm | |
| Model | DC-MU1 | |
| Guiding Roller | Adjust the coil feeding width | |
|---|---|---|
| Pre-cut Broaching Shear | Cut the steel coil before roll forming | |
| Digital Display | See the feeding width directly |
| Working Speed | Around 20 m/min | |
|---|---|---|
| Structure | Wall panel type. Optional: Cast-iron stands or guide pillar | |
| Driving System | Chain system. Optional: Gearbox | |
| No. of Forming Stations | 18 stands | |
| Shaft Diameter | 70mm solid shaft | |
| Motor Power | 5.5 Kw | |
| Roller Material | 45# steel polished and chromed HRC58-62° | |
| Shaft Material | High grade 45# steel polished(CNC lathe) | |
| Steel Coil Material | PPGI or GI | |
| Steel Coil Thickness | 0.25-0.8mm |
| Common Power Type | Hydraulic. Optional: motor type. | |
|---|---|---|
| Hydraulic Power | 4-5.5Kw, customizable | |
| Blade Material | Cr12 Mov | |
| Hardness | With quenched treatment HRC 58 - 62° |
| Solution 1 | Run-out table | Solution 2 | Auto stacker |
|---|---|---|---|
| Power Type | Non-powered, mainly manual handling | Power Type | Motorized, 3Kw |
| Dimension | Length 4m, customizable | Dimension | Length 4m-6m, customizable |
| PLC Brand | Delta, customizable | Power Supply | 380v, 50HZ, 3Phase (It depends on customer requirement) |
|---|---|---|---|
| Encoder Brand | Omron, customizable | Language | Chinese + English, Spanish, French, Russian, etc |
| Touch Screen | MCGS, customizable | Operation type | Manual /auto two-type switch |
| Motor Power | 5.5Kw | |
|---|---|---|
| Oil Required | N32 or N46 hydraulic oil is available | |
| Design | The hydraulic station has a fan cooling system | |
| Optional | It can be installed on or inside the roll former to save space | |
| Decoiler |
|
|---|---|
| Guide | Keeps material aligned during forming |
| Roll former |
|
| Hydraulic Punch |
|
| Hydraulic Cutter |
|
| Out table | Collects finished ridge caps |
| Component | Quantity |
|---|---|
| Hydraulic Decoiler | 1 set |
| Roll Former | 1 set |
| Hydraulic Cutter | 1 set |
| Out Table | 2 sets |
| PLC Cabinet | 1 set |
| Hydraulic Station | 1 set |
For this ridge cap profile, we offer customization in punching rib patterns, edge folding depth, arc radius, and profile dimensions. The control system can be upgraded to touch screen or integrated PLC. Hydraulic punching and cutting units can be adjusted for different sheet thicknesses, ensuring compatibility with your specific roofing projects.
ビデオ
ビデオ
|
|
| Moq: | 1セット |
| 価格: | USD1,000-700,000. Based on customization. |
| 標準パッケージ: | 工業用プラスチックフィルム包装 鋼鉄線で固定 |
| 配達期間: | 30日 |
| 決済方法: | L/C、T/T |
| 供給能力: | 月額30セット |
This ridge cap roll forming production line is designed for roofing accessory manufacturers, construction suppliers, and steel profile distributors. It provides stable performance, reduced floor space, and versatile customization. With features like folded edges, rib punching, and anti-rust design, it ensures higher product quality, safety, and durability for global roofing projects.
The ridge cap is made from galvanized or pre-painted steel, with thickness ranging from 0.3mm to 0.6mm. It features an arc-shaped profile with folded edges for safety and corrosion resistance. Rib embossing enhances strength and aesthetics. Widely applied in residential, commercial, and industrial roofing, it serves as both a protective and decorative component.
Material: Galvanized Steel / PPGI / Aluminum | Thickness: 0.3-0.8mm
Yield strength: 200 - 350 Mpa | Tensil stress: 200 -350 Mpa
Flow Chart: Decoiler -> Guide -> Roll forming machine -> Hydraulic Punch -> Hydraulic Cutter -> Out table
Process: The steel coil is guided into the roll former, where it is shaped into an arc ridge cap with folded edges. A hydraulic punching unit creates decorative or reinforcing ribs. The hydraulic cutter ensures precise length cutting. This process delivers uniform, durable, and aesthetically enhanced roofing ridge caps efficiently.
| Structure | Double-support | |
|---|---|---|
| Working Form | Manual, motorized, or hydraulic | |
| Loading Capacity | 5T/7T/10T, customizable | |
| Coil Width | 1250mm, customizable | |
| Inner Diameter | Φ450 - Φ550 mm | |
| Out Diameter | 1500 mm | |
| Model | DC-MU1 | |
| Guiding Roller | Adjust the coil feeding width | |
|---|---|---|
| Pre-cut Broaching Shear | Cut the steel coil before roll forming | |
| Digital Display | See the feeding width directly |
| Working Speed | Around 20 m/min | |
|---|---|---|
| Structure | Wall panel type. Optional: Cast-iron stands or guide pillar | |
| Driving System | Chain system. Optional: Gearbox | |
| No. of Forming Stations | 18 stands | |
| Shaft Diameter | 70mm solid shaft | |
| Motor Power | 5.5 Kw | |
| Roller Material | 45# steel polished and chromed HRC58-62° | |
| Shaft Material | High grade 45# steel polished(CNC lathe) | |
| Steel Coil Material | PPGI or GI | |
| Steel Coil Thickness | 0.25-0.8mm |
| Common Power Type | Hydraulic. Optional: motor type. | |
|---|---|---|
| Hydraulic Power | 4-5.5Kw, customizable | |
| Blade Material | Cr12 Mov | |
| Hardness | With quenched treatment HRC 58 - 62° |
| Solution 1 | Run-out table | Solution 2 | Auto stacker |
|---|---|---|---|
| Power Type | Non-powered, mainly manual handling | Power Type | Motorized, 3Kw |
| Dimension | Length 4m, customizable | Dimension | Length 4m-6m, customizable |
| PLC Brand | Delta, customizable | Power Supply | 380v, 50HZ, 3Phase (It depends on customer requirement) |
|---|---|---|---|
| Encoder Brand | Omron, customizable | Language | Chinese + English, Spanish, French, Russian, etc |
| Touch Screen | MCGS, customizable | Operation type | Manual /auto two-type switch |
| Motor Power | 5.5Kw | |
|---|---|---|
| Oil Required | N32 or N46 hydraulic oil is available | |
| Design | The hydraulic station has a fan cooling system | |
| Optional | It can be installed on or inside the roll former to save space | |
| Decoiler |
|
|---|---|
| Guide | Keeps material aligned during forming |
| Roll former |
|
| Hydraulic Punch |
|
| Hydraulic Cutter |
|
| Out table | Collects finished ridge caps |
| Component | Quantity |
|---|---|
| Hydraulic Decoiler | 1 set |
| Roll Former | 1 set |
| Hydraulic Cutter | 1 set |
| Out Table | 2 sets |
| PLC Cabinet | 1 set |
| Hydraulic Station | 1 set |
For this ridge cap profile, we offer customization in punching rib patterns, edge folding depth, arc radius, and profile dimensions. The control system can be upgraded to touch screen or integrated PLC. Hydraulic punching and cutting units can be adjusted for different sheet thicknesses, ensuring compatibility with your specific roofing projects.
